Park-tool Chain Checker Bedienungsanleitung PDF herunterladen

Park Tool Co.

5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com

CC-2 Chain Checker

Instructions:

1. Set pivoting gauge so “0” is visible in viewing window.

2. Lower CC-2 so ﬁxed pin rests between chain’s outer plates

and movable pin rests between chain’s inner plates.

3. Lightly push pivoting gauge just until it stops. Forcing the

gauge will damage the CC-2’s pins, resulting in inaccurate

measurements. Read number in viewing window. Chain re-

placement is generally recommended at .75%, although this

percentage can vary between chain manufacturers. Contact

the manufacturer for speciﬁc recommendations.

A worn chain shifts poorly and wears sprockets at an accelerated

rate. The CC-2 Chain Checker provides a precise measurement of

chain wear on most derailleur chains.

Notes:

Because a chain must have a small amount of play in the links

to run smoothly, the CC-2 will show a reading of .25% to .5%

on new chains. This does not mean that the chain is .25% to

.5% worn. It only means there is .25% to .5% play built into the

links of the chain before it starts to wear. No matter what the

reading of a new chain, it should be replaced when the CC-2

shows a reading of .75 (or the percentage recommended by

the manufacturer).

The length of time and amount of riding it takes to wear a

chain is determined by several factors, including chain quality,

riding conditions, and level of maintenance. As a result, chain

life can vary signiﬁcantly.

.25

.50

.75

1.0

.25

.50

.75

1.0

Moveable pin

Beweglicher Stift

Goupille mobile

Perno movible

Inner plates

Innere Laschen

Plaques intérieures

Placas interiores

Outer plates

äußere Laschen

Plaques extérieures

Placas exteriores

Fixed pin

Feststehender Stift

Goupille ﬁxe

Perno ﬁjo

Tool body

Werkzeugkörper

Corps de l’outil

Cuerpo de la herramienta

Pivoting Gauge

Schwenkbare Anzeige

Levier pivotant

Medidor de perno móvil

1 2

CC-2 Chain Checker 1

Inhaltsverzeichnis

Seite 1 - CC-2 Chain Checker

Seite 2

Park Tool Co.5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.comCC-2 KettenprüferCC-2 Outil de Vériﬁcation d’usure de ChaineCC-2 Checad

Kommentare zu diesen Handbüchern

Keine Kommentare

Park-tool Chain Checker Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Fahrräder Park-tool Chain Checker herunter. Park Tool Chain Checker User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Fahrräder Park-tool Chain Checker